What reason is aperture slant small when twist drill is drilling? If the drill hole is not round, it is probably because the bit edge belt has been seriously worn down. In this case, all you have to do is to change the drill bit or to polish the drill bit. What reason is the […]
The drill bit is semi-closed cutting, and the heat of drilling is difficult to spread outward, so it is easier to form a high cutting temperature. Therefore, the main cause of bit wear is thermal wear, for high-speed steel bit, mainly phase change wear. In addition, there are contact fatigue, excessive deformation, edge breaking, brittle […]
The grinding quality of twist drill directly affects its drilling quality. So the grinding of twist drill is very important. There are two kinds of grinding conditions for twist drills: 1) correct grinding and 2) incorrect grinding. The impact of these two conditions on workpiece processing is described below. 1. Correct grinding Drilling condition: When […]
In the case of constant cutting parameters, in order to improve production efficiency and reduce production costs, the tool coating technology to reduce tool wear, and in order to improve tool durability has become a trend. Tool coating refers to coating a thin layer of refractory metals or non-metallic compounds with good wear resistance on […]
According to the machining characteristics of the material, the drill bit is required to have the following characteristics: the hardness of the drill bit must be greater than the hardness of the workpiece to be processed. Because the bit bears a lot of torsion and axial force when machining the workpiece, it must have enough […]
Dear customer, It seems that Christmas time is here once again, and it is time again to bring in the New Year. We wish you A Very Happy and Joyful Christmas filled with joy and love. And hope we can develop our business and friendship further!
The alloy milling cutter is a tool with high hardness, high bending strength and toughness. Its hardness value varies with the nature, quantity, particle size of carbide and the content of metal bonding phase, and generally decreases with the increase of the content of bonding metal phase. Alloy milling cutter is suitable for processing copper, […]
The common cutting tool materials used in tool grinding include: high speed steel, powder metallurgy high speed steel, hard alloy, PCD, CBN, metal ceramics and other super hard materials. The high – speed steel tools have the sharp, the toughness good merit. Carbide cutting tools have high hardness but poor toughness. The density of carbide […]
