Blog Grid

December 11, 2018

Several operations related to drilling & Technical requirements for drilling

Several operations related to drilling Hole is an important surface on the box, bracket, sleeve, ring and disk parts, and is often encountered in machining. Drilling refers to the method of machining holes on solid materials with drill bits. There are several operations related to drilling. Some of them are: Reaming, Tapping, Counterboring, Countersinking, Center drilling, […]

Technology
December 4, 2018

When do you stop using the tool and then grind it?

One auto parts manufacturer sends taps for repairs every 2,000 to 3,000 holes it processes. In this way, each tap can be reused three times. But if he uses the taps until they are completely damaged and then sends them back for repair, they may only be able to process 1,000 more. We recommend that […]

Technology
November 28, 2018

Some problems that must not be neglected in tool grinding

Tool materials Common tool materials in tool grinding are: high speed steel, powder metallurgy high speed steel, hard alloy and PCD, CBN, cermet and other superhard materials. High speed steel tool sharp, good toughness; Carbide cutting tools have high hardness but poor toughness. The density of carbide tool is obviously higher than that of HSS […]

Technology
November 19, 2018

Introduction of cutting tools for several European brands

SANDVIK SANDVIK was founded in 1942 and belongs to Sandviken Group. The company is headquartered in Sandviken. It has the largest cemented carbide blade manufacturer in the world in Gimo, Sweden. SANDVIK has 73 subsidiaries or branches in more than 60 countries around the world. SANDVIK has 39 production bases, 3 central warehouses and 19 […]

Company News
November 9, 2018

Coating and grinding technology of tools

In the regrinding process of the drill bit or milling cutter, cutting lip should be ground to remove the original coating, so the grinding wheel used must be of sufficient hardness. Regrinding pretreatment of cutting lip is crucial, not only to ensure that the geometric shape of the original cutting lip after regrinding can be […]

Technology
November 1, 2018

You need to know the alloy milling cutter before grinding

The alloy milling cutter is a tool with high hardness, high bending strength and toughness. Its hardness value varies with the nature, quantity, particle size of carbide and the content of metal bonding phase, and generally decreases with the increase of the content of bonding metal phase. Alloy milling cutter is suitable for processing copper, […]

Technology
Cart